You will need to have purchased the BBPOS Wise POS E Card Reader in order to proceed. Click here for purchase information.

You may only have your terminal connected to POS or Billing Manager - they cannot be online at the same time.

A. Turn the Reader On

You must first install the battery, and charge the reader using the provided cable.

Once the reader is fully charged, hold down the power button until the screen turns on, and then press the power button to wake the device.

B. Connect Reader to the Internet

You will need to connect your WisePOS card reader to the same local network you are using with the device accessing GoMotion. This can be done via WiFi or an ethernet cable (an optional dock which is purchased separately will be needed.)

For more information connecting your reader to the internet, please click here.

C. Add Reader to GoMotion

  1. Enter 07139 into the terminal and it will display a registration code.

    • If using the card reader for both PoS and Billing manager, write down this code to use each time you switch between the two.

  2. On your computer, navigate to your GoMotion website and Sign In.

  3. In the side menu, click Point of Sale > Setup.

  4. Click Manage Terminal Readers...

  5. Click Add New Reader...

  6. Enter the reader's registration code from step 1.

  7. Enter a Label, such as "Front Desk."

  8. Click Register.

  9. Click Close.

__________
See Also
BBPOS WisePOS E Setup documentation

Did this answer your question?